-
50W to 400W servo AC setup, customize and save
Build your 400W servo system with this easy to used product configurator. No need to go looking for the correct cables, drives, or servos, it’s all here just select your options!
-
400W AC servo motor – ELM2H-0400LA60E (has brake)
The servo motors use permanent magnet rotors which provide features such as; high torque density, high peak torque, low noise, low temperature rising and lower current consumption. This AC servo motor is power rated at 400W, with a power range from 50W to 1000W, frame size range from 40mm to 80mm. The AC servo motors…
-
400W DC servo driver, EtherCAT, LeadShine – ELD3-EC7010BM
Space saving palm sized EtherCAT drives Full closed loop function with 2nd encoder Supports various encoders such as ABZ, Tamagawa, BISS-C. Including hall sensors Safety features integrated. STO, Logic Power , Brake Output USB Type-C Tuning Port 6 digital inputs, 3 digital outputs and 2 analog inputs Easy tuning functions Can be matched with many…
-
400w integrated servo motor – iSV2-RS6040V48H – LeadShine
We have implemented about 80 of these servo motors in the last few years, they are a great, easy to use, reliable servo with so many features! This Leadshine iSV2-RS6040V48H is a 60mm integrated servo motor. At a very compact size an iSV2 integrated servo motor can save mounting space, eliminate encoder & power cable…
-
400W integrated servo motor with brake, iSV2-RS6040V48G
● Main power voltage: 24-60VDC. Rated voltage: 48VDC ● Rated power: 400W. Rated torque: 1.27N.m. Overload: 300% ● 17 bit incremental magnetic encoder ● Pulse+Direction ● Modbus RTU over RS485. Build-In 16 PR paths ● Dip switch for node ID, baud rate and terminating resistor settings ● RS-232 serial interface for easy tuning with Motion Studio ● With brake
-
DC Servo Driver – ELD2-RS7015B – 15Arms; 45A peak
The ELD2-RS7015B servo drive operates in torque, velocity, or position mode. This servo drive can be controlled over the Modbus RTU, ±10V analog commands, and pulse train. ● Main power voltage: 24-70VDC ● Output current: 15Arms continuous; 45A peak ● Direct brake output: 24VDC/1A ● Pulse+Direction, analog input ● Modbus RTU over RS485. Build-In 16 PR paths ● Encoder AB…
-
DC Servo Driver (CANopen)- ELD2-CAN7015B
The ELD2-CAN7015B servo drive can be controlled over CANopen. This servo drive operates in Profile Position, Profile velocity, Profile Torque, or Homing mode. ● Main power voltage: 24-70VDC ● Output current: 15Arms continuous; 45A peak ● Direct brake output: 24VDC/1A ● CANopen: CiA301. CiA402. Profile Position/Profile velocity/Profile Torque/Homing ● Encoder AB output ● Dip Switch for node ID, baud rate…
-
EL7-EC400N – 400W Servo Drive EtherCAT
EL7-EC400N – 400W EtherCAT servo driver User-configurable I/Os: 4 DI, 3 DO and 2 high speed touch probe input DB15 I/O port Equipped with internal regenerative resistor the STO on the EL7 is not yet SIL3 certified. Please use EL8 models if a certified STO is required. Position, velocity and torque loop control Servo functions…
-
EL8-EC400F – 400W AC Servo Driver, EtherCAT
400W – servo driver – EtherCAT User-configurable I/Os: 8 DI, 3 DO, 2 AI, 2AO and 2 high speed touch probe inputs Equipped with internal regenerative resistor Position, velocity and torque loop control New servo functions including Zero Tracking Control (ZTC), Position comparison, Black box, 1-click/1-parameter easy tunings Safety functions such as Safe Torque Off…
-
EL8-RS400F – 400W AC Servo Driver, Pulse+Dir, Modbus, Analogue
400W Driver – Modbus RTU/Pulse+Direction/Analogue User-configurable I/Os: 10 DI, 6 DO, 3 AI, 2 AO Equipped with internal regenerative resistor and direct drive holding brake Position, velocity, torque and hybrid control New servo functions including Zero Tracking Control (ZTC), Position comparison, Black box, 1-click/1-parameter easy tunings Safety functions such as Safe Torque Off (STO)…
-
400W AC servo motor ELM1H-0400MA60F
Rated voltage 220VAC, rated power 400W Frame 60mm, rated torque 1.27N·m, rated speed 3000r/min 23-bit magnetic encoder No brake, direct connector Strong overload capacity IP67
-
400W AC servo motor ELM2H-0400LA60F
Rated voltage 220VAC, rated power 400W Frame 60mm, rated torque 1.27N·m, rated speed 3000r/min 23-bit optical encoder No brake, direct connector Strong overload capacity IP67
-
ELVM6040V48FH-M17-HD – 400W, 48V servo motor
The ELVM series is a new low voltage servo motor series designed by LeadShine with own intellectual property rights. The servo motors provide features of short length, high torque density, high peak torque, low noise, low temperature rising and IP65 protection. with 2500-Line incremental encoder or 17-bit absolute encoder. Model ELVM6040V48FH-M17-HD Frame Size (mm) 60…
-
ELVM6060V48FH-M17-HD – 600W, 48V servo motor
ELVM series low voltage servo motors, designed by LeadShine, who have intellectual property rights for this product. These servo motors provide features of compact length, high torque density, high peak torque, low noise and IP65 protection. ELVM series servo motors have power options from 50W to 1000W (This motor is 600W) with 2500-Line incremental encoder…
-
Nema 34 integrated servo motor – iSV2-RS8675V48H
Leadshine iSV2 series includes 57mm, (nema 23), 60mm, 80mm and 86mm (Nema34) frame size servomotors which are integrated with 17-bit encoders and servo drives. The iSV2-RS8675V48H is a 86mm (Nema 34) integrated servo motor. Its power ranges from 200 to 750W with peak torque to 7.2 Nm. At a very compact size an iSV2 integrated…
-
ServoGearW400 – servo & worm gearbox with built in driver – 400W
Integrated Servo, gearbox & controller system, designed & assembled in New Zealand by Palmer Automation. (that’s us!) 400W 48v DC (can run at 24v but lowers wattage) Gearbox ratio is 10:1 but can be customized Mounts to 25mm shaft. Can provide torque arm on request Features: 400W servo with build in driver, can be programed,…