-
1000W AC servo motor – ELM2H-1000LA80E (brake)
The 1000W AC servo motors are designed by Leadshine. The servo motors use permanent magnet rotors. This provides features, such as; high torque density, high peak torques, low noise, low temperature rising and lower current consumption. The motors power range from 50W to 1000W, frame size range from 40mm to 80mm. Rated voltage 220VAC, rated…
-
1000W AC servo motor – ELM2H-1000LA80F (no brake)
The 1000W AC servo motors are designed by Leadshine. The servo motors use permanent magnet rotors. This provides features, such as; high torque density, high peak torques, low noise, low temperature rising and lower current consumption. The motors power range from 50W to 1000W, frame size range from 40mm to 80mm. Rated voltage 220VAC, rated…
-
400W integrated servo motor with brake, LeadShine – iSV2-RS6040V48G
● Main power voltage: 24-60VDC. Rated voltage: 48VDC ● Rated power: 400W. Rated torque: 1.27N.m. Overload: 300% ● 17 bit incremental magnetic encoder ● Pulse+Direction ● Modbus RTU over RS485. Build-In 16 PR paths ● Dip switch for node ID, baud rate and terminating resistor settings ● RS-232 serial interface for easy tuning with Motion Studio ● With brake
-
CS-M23445 – Nema 34, closed loop, 109 long, 6A, 4.5N.m
2 phase, NEMA 34 frame size 109 mm (4.29 inch) long 6 A phase current 4.5 N.m (638 oz-in) holding torque 14 mm (0.551 inch) shaft size Integrated 1,000 line (4,000 count/revolution) quadrature rotary encoder High precision, low motor heating, and low vibration 2D drawing download: here 3D Step file download: here
-
ics-2331-L integrated closed loop stepper motor
● NEMA23, 3.1N.m ● Enhance performance, especially at low-speed application (<60RPM) ● Soft-start with no “jump” when powered on ● Pulse & direction (PUL&DIR) or CW&CCW (double pulse) control ● 3 digital inputs, 1 optically isolated digital output ● 14-bit single-turn increment encoder ● RS232 communication for Leadshine software connection