5.0A NEMA 23 stepper motor – 57CM26
Built with premium quality materials including bearings and shaft, the 57CM26 NEMA 23 can move the attached load at high precision with very low motor heating and vibration. 2 phase, NEMA 23 frame size 84 mm (3.31 inch) long 5 A phase current 2.6 N.m (369 oz-in) holding torque 8 mm (0.315 inch) shaft size…
57CM23-SZ NEMA 23, Dual 8mm shaft, 2.3 N.m
Dual Shaft Stepper. 2 phase, NEMA 23 frame size 76 mm (2.99 inch) long 5 A phase current 2.3 N.m (326 oz-in) holding torque 8 mm (0.315 inch) shaft size Built with high quality materials including bearings and shaft made by Japanese manufacturers High precision, low motor heating, and low vibration
750W AC servo motor – ELM1H-0750MA80F
ELM1 series servo motors with magnetic encoder, these servo motors use permanent magnet rotors, providing features, such as; high torque density, high peak torques, low noise, low temperature rise and lower current consumption. Power range from 50W to 1000W, frame size range from 40mm to 80mm. Rated voltage 220VAC, rated power 750W Frame 80mm, rated…
750W AC servo motor – ELM2H-0750LA80E (brake)
The 750W AC servo motors are designed by Leadshine. The servo motors use permanent magnet rotors. This provides features, such as; high torque density, high peak torques, low noise, low temperature rising and lower current consumption. The motors power range from 50W to 1000W, frame size range from 40mm to 80mm. Rated voltage 220VAC, rated…
750W AC servo motor – ELM2H-0750LA80F LeadShine
The 750W AC servo motors are designed by Leadshine. The servo motors use permanent magnet rotors. This provides features, such as; high torque density, high peak torques, low noise, low temperature rising and lower current consumption. The motors power range from 50W to 1000W, frame size range from 40mm to 80mm. Rated voltage 220VAC, rated…
750W integrated servo motor, with brake – iSV2-RS8075V48G
● Main power voltage: 24-60VDC. Rated voltage: 48VDC ● Rated power: 750W. Rated torque: 2.39N.m. Overload: 300% ● 17 bit incremental magnetic encoder ● Pulse+Direction ● Modbus RTU over RS485. Build-In 16 PR paths ● Dip switch for node ID, baud rate and terminating resistor settings ● RS-232 serial interface for easy tuning with Motion Studio ● With brake
iSV2-CAN8075V48G -750W integrated servo motor, with brake, (CANopen).
The iSV2-CAN8075V48G is a 750W CANopen integrated servo motor. Leadshine iSV2 series includes 60mm and 80mm frame size servomotors which are integrated with 17-bit encoders and servo drives. At very compact size an iSV2 integrated servo motor can save mounting space, eliminate encoder and power cable connections, reduce interference and reduce system cost. ● Main…