-
iCS-RS1708 – 0.8N.m NEMA 17 closed loop stepper motor
iCS series is integrated closed-loop stepper motor with 14-bit single-turn absolute encoder for smooth and jitter-free motor start-up. iCS series motors support Modbus RS485 communication with Indexer control function. With a more compact design, it is especially suitable for applications with strict mounting space requirements. ● NEMA17, 0.8N.m ● 14-bit single-turn increment encoder ● Support Modbus RTU…
-
iEM-RS1706 – 0.6N.m Nema 17 stepper with built in driver
iEM-RS Series is an integrated stepper motor. Based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. Its built-in PR feature with 16-segment position table (PR Mode) can save additional controllers in most of point-to-point applications. The iEM-RS series motors are highly reliable and affordable and performs excellently. ● NEMA17, 0.6N.m…
-
0.6N.m, 2.5A, NEMA 17 stepper motor CS-M21706 – 70mm long
The CS-M series closed loop stepper motors are integrated with a 1,000 line (4,000 counts/revolution) or 5,000 line (20,000 counts/revolution) differential ended rotary encoder. NEMA 17 stepper motor is 62mm long with a 1.5A phase current. Build with high quality materials including bearings and shaft made by famous manufacturers, this closed loop stepper motor can…
-
0.4N.m, 1.5A, NEMA 17 stepper motor CS-M21704 – 62mm long
The CS-M series closed loop stepper motors are integrated with a 1,000 line (4,000 counts/revolution) or 5,000 line (20,000 counts/revolution) differential ended rotary encoder. NEMA 17 stepper motor is 62mm long with a 1.5A phase current. Build with high quality materials including bearings and shaft made by famous manufacturers, this closed loop stepper motor can…
-
42CM02, NEMA 17, 33 mm, 1.5A, 0.21 N.m
Leadshine 2 phase, NEMA 17 stepper motor 33 mm (1.30 inch) long 1.5 A phase current 0.21 N.m (30 oz-in) holding torque 5 mm (0.197 inch) shaft size Built with high quality materials including bearings and shaft made by Japanese manufacturers High precision, low motor heating, and low vibration 2D drawing: 42CM02 3D CAD file:…
-
42CM08C, NEMA 17, 60 mm, 2.5A, 0.8 N.m
2 phase, NEMA 17 frame size 60 mm (2.36 inch) long 2.5 A phase current 0.8 N.m (113 oz-in) holding torque 5 mm (0.197 inch) shaft size Built with high quality materials including bearings and shaft made by Japanese manufacturers High precision, low motor heating, and low vibration 2D drawing: 42CM08C 3D CAD file: 42CM08C
-
iCS-1703 – Nema 17, 0.3N.m, close loop stepper with built in driver
-
iCS-1708 – 0.6N.m Nema 17 stepper with built in driver, closed loop
-
iEM-1706 – 0.6N.m Nema 17 stepper with built in driver
