-
8N.m, 6A, Nema 34, stepper motor CS-M23480 – 126mm long,
CS-M23480 Nema 34 closed loop Stepper motor
-
Closed loop stepper drive CS1-D503S
Leadshine CS1-D503S is a closed loop stepper drive designed to solve the loss of step problem in open loop stepper control systems. Improved system reliability at minimal cost increase. It implements the advanced control algorithm of Leadshine based on its tens of years experience in stepper and servo controls. The CS1-D503S are highly reliable, affordable…
-
closed loop stepper driver CS-D507E
No loss of step, no hunting, no torque reservation Dual-axis control via one IP address, support CiA402 EtherCAT communication Support operation modes: Profile Position, Profile Velocity, Homing 2*4 configurable digital inputs, 2*2 optically isolated digital outputs include brake output Low noise and vibration, smooth motion USB port for Leadshine software connection Two 7-segment display velocity…
-
CS-D1008E – 8A closed loop stepper drive
● No loss of step & no torque reservation & no hunting & no tuning. ● Enhance performance, especially at low-speed application (<60RPM). ● Auto-tuning to match wide-range NEMA 23, 24 and 34 closed-loop stepper motors. ● Max 500 KHz input frequency. ● 15 micro step settings of 800-51,200 via DIP switches, or 200-51,200 via…
-
CS3E stepper motor driver, EtherCAT, LeadShine – CS3E-D1008
The newly released CS3E stepper motor driver supports CANopen over EtherCAT (CoE) control and CiA 402 operating modes. Additionally; Profile Position (PP), Profile Velocity (PV), Homing (HM) and Cyclic Synchronous Position (CSP) are inluded features. This product is compatible with many brands of EtherCAT controller/PLC such as Beckhoff, Omron, Trio, Keneyce etc. The CS3E-D1008 is…
-
DC Servo Driver – 2ELD2-RS7030B – 30A rms dual drive
The ELD2-RS7015B servo drive operates in torque, velocity, or position mode. This servo drive can be controlled over the Modbus RTU, ±10V analog commands, and pulse train. ● Dual-axis, Pulse+Direction ● Main power voltage: 24-70VDC. Logic power voltage: 24-70VDC ● Output current: 2 x 30Arms continuous/ 90A peak ● Direct brake output: 24V/1A ● Modbus RTU over RS485. Build-In…
-
DC Servo Driver – ELD2-RS7005 – 5A rms, 21A peak
● Main power voltage: 24-70VDC ● Output current: 5Arms continuous; 21A peak ● Pulse+Direction, analog input ● Modbus RTU over RS485. Build-In 16 PR paths ● Encoder AB output ● Dip Switch for node ID, baud rate and terminating resistor settings ● RS-232 serial interface for easy tuning with Motion Studio Drive model ELD2-RS7005 Size(mm) 118*79.5*25.5 Rated power(kW) 0.1 Rated current(Arms)…
-
DC Servo Driver – ELD2-RS7015B – 15Arms; 45A peak
The ELD2-RS7015B servo drive operates in torque, velocity, or position mode. This servo drive can be controlled over the Modbus RTU, ±10V analog commands, and pulse train. ● Main power voltage: 24-70VDC ● Output current: 15Arms continuous; 45A peak ● Direct brake output: 24VDC/1A ● Pulse+Direction, analog input ● Modbus RTU over RS485. Build-In 16 PR paths ● Encoder AB…
-
DC Servo Driver (CANopen)- ELD2-CAN7015B
The ELD2-CAN7015B servo drive can be controlled over CANopen. This servo drive operates in Profile Position, Profile velocity, Profile Torque, or Homing mode. ● Main power voltage: 24-70VDC ● Output current: 15Arms continuous; 45A peak ● Direct brake output: 24VDC/1A ● CANopen: CiA301. CiA402. Profile Position/Profile velocity/Profile Torque/Homing ● Encoder AB output ● Dip Switch for node ID, baud rate…
-
Dual stepper motor driver, EtherCAT, 2CS3E-D503 LeadShine
The 2CS3E series dual stepper motor driver support operating modes: PP, PV, HM, CSP. This product can be matched with most master stations, such as; Beckhoff, Omron, Keyence, Panasonic etc. No loss of step, no hunting, no torque reservation Dual-axis control via one IP address, support CiA402 EtherCAT communication Support operation modes: Profile Position, Profile…
-
EL7-EC400N – 400W Servo Drive EtherCAT
EL7-EC400N – 400W EtherCAT servo driver User-configurable I/Os: 4 DI, 3 DO and 2 high speed touch probe input DB15 I/O port Equipped with internal regenerative resistor the STO on the EL7 is not yet SIL3 certified. Please use EL8 models if a certified STO is required. Position, velocity and torque loop control Servo functions…
-
EL7-RS2000Z
EL7-RS2000Z 2Kw servo drive with Modbus + pluse/dir & analogue control options
-
EL8-EC400F – 400W AC Servo Driver, EtherCAT
400W – servo driver – EtherCAT User-configurable I/Os: 8 DI, 3 DO, 2 AI, 2AO and 2 high speed touch probe inputs Equipped with internal regenerative resistor Position, velocity and torque loop control New servo functions including Zero Tracking Control (ZTC), Position comparison, Black box, 1-click/1-parameter easy tunings Safety functions such as Safe Torque Off…
-
EL8-RS400F – 400W AC Servo Driver, Pulse+Dir, Modbus, Analogue
400W Driver – Modbus RTU/Pulse+Direction/Analogue User-configurable I/Os: 10 DI, 6 DO, 3 AI, 2 AO Equipped with internal regenerative resistor and direct drive holding brake Position, velocity, torque and hybrid control New servo functions including Zero Tracking Control (ZTC), Position comparison, Black box, 1-click/1-parameter easy tunings Safety functions such as Safe Torque Off (STO)…
-
400W AC servo motor ELM1H-0400MA60F
Rated voltage 220VAC, rated power 400W Frame 60mm, rated torque 1.27N·m, rated speed 3000r/min 23-bit magnetic encoder No brake, direct connector Strong overload capacity IP67
-
400W AC servo motor ELM2H-0400LA60F
Rated voltage 220VAC, rated power 400W Frame 60mm, rated torque 1.27N·m, rated speed 3000r/min 23-bit optical encoder No brake, direct connector Strong overload capacity IP67