-
1000W AC Servo Driver EtherCAT LeadShine EL8-EC1000F
Servo drives with 1000W power User-configurable I/Os: 8 DI, 3 DO, 2 AI, 2AO and 2 high speed touch probe inputs Equipped with internal regenerative resistor Position, velocity and torque loop control New servo functions including Zero Tracking Control (ZTC), Position comparison, Black box, 1-click/1-parameter easy tunings Safety functions such as Safe Torque Off (STO)…
-
1000W AC servo motor – ELM2H-1000LA80E (brake)
The 1000W AC servo motors are designed by Leadshine. The servo motors use permanent magnet rotors. This provides features, such as; high torque density, high peak torques, low noise, low temperature rising and lower current consumption. The motors power range from 50W to 1000W, frame size range from 40mm to 80mm. Rated voltage 220VAC, rated…
-
1000W AC Servo Motor LeadShine – ELM1H-1000MA80F
The servo motors use rare earth neodymium-iron-boron permanent magnet rotors, provide features of high torque density, high peak torques, low noise, low temperature rising, lower current consumption. This AC servo motor is power rated at 1000W, with a power range from 50W to 1000W, frame size range from 40mm to 80mm.
-
1500W AC Servo EtherCAT – EL8-EC1500F
EL8-EC Series AC Servo Product is a whole new high-end AC servo drivers and motors. EL8-EC series AC servo drivers has a power rating range of 50W up to 2000W. The EL8-EC series AC servo drivers supports EtherCAT communication protocol. Features include; dynamic braking and internal holding brake which comes with internal regenerative resistor. The…
-
2CS3E-D507 Dual Stepper motor driver, EtherCAT, LeadShine
No loss of step, no hunting, no torque reservation Dual-axis control via one IP address, support CiA402 EtherCAT communication Support operation modes: Profile Position, Profile Velocity, Homing 2*4 configurable digital inputs, 2*2 optically isolated digital outputs include brake output Low noise and vibration, smooth motion USB port for Leadshine software connection Two 7-segment display velocity…
-
4.0A NEMA 23 stepper motor – CS-M22313
The CS-M series closed loop stepper motors are integrated with a 1,000 line (4,000 counts/revolution) or 5,000 line （20,000 counts/revolution） differential ended rotary encoder. Built with premium quality materials including bearings and shaft, this closed loop stepper motor can be adopted in many industrial applications. Such as; high precision, low motor heating, and low vibration.…
-
400W AC servo motor – ELM2H-0400LA60E (brake)
The servo motors use permanent magnet rotors which provide features such as; high torque density, high peak torque, low noise, low temperature rising and lower current consumption. This AC servo motor is power rated at 400W, with a power range from 50W to 1000W, frame size range from 40mm to 80mm. The AC servo motors…
-
400W DC servo driver, EtherCAT, LeadShine – ELD3-EC7010BM
Space saving palm sized EtherCAT drives Full closed loop function with 2nd encoder Supports various encoders such as ABZ, Tamagawa, BISS-C. Including hall sensors Safety features integrated. STO, Logic Power , Brake Output USB Type-C Tuning Port 6 digital inputs, 3 digital outputs and 2 analog inputs Easy tuning functions Can be matched with many…
-
400w integrated servo motor – iSV2-RS6040V48H – LeadShine
We have implemented about 80 of these servo motors in the last few years, they are a great, easy to use, reliable servo with so many features! This Leadshine iSV2-RS6040V48H is a 60mm integrated servo motor. At a very compact size an iSV2 integrated servo motor can save mounting space, eliminate encoder & power cable…
-
400W integrated servo motor with brake, LeadShine – iSV2-RS6040V48G
● Main power voltage: 24-60VDC. Rated voltage: 48VDC ● Rated power: 400W. Rated torque: 1.27N.m. Overload: 300% ● 17 bit incremental magnetic encoder ● Pulse+Direction ● Modbus RTU over RS485. Build-In 16 PR paths ● Dip switch for node ID, baud rate and terminating resistor settings ● RS-232 serial interface for easy tuning with Motion Studio ● With brake
-
400W Servo Drive EtherCAT EL7-EC400N LeadShine
This product is the 400W servo drive in the EL7-EC Series. The AC servo products are high performance 220V 1ph AC digital servo which is designed for position/velocity/torque high accurate control with power rating ranging up to 2.0kW which provides a perfect solution for different applications with easy tuning process. Based on the ETG COE +…
-
50W AC Servo motor (No Brake)- ELM1H-0050MA40F
ELM1 series servo motors with magnetic encoder, these servo motors use permanent magnet rotors, providing features, such as; high torque density, high peak torques, low noise, low temperature rise and lower current consumption. Power range from 50W to 1000W, frame size range from 40mm to 80mm. Rated voltage 220VAC, rated power 50W Frame 40mm, rated…
-
50W AC Servo motor ELVM4005V48FH-M17-HD (No Brake)
Voltage 48V, rated power 50W Frame 40mm, rated torque 0.16Nﾷm, rated speed 3000r/min No brake Insulation class: Class F 17 bit magnetic multi-turn absolute encoder IP65 Model ELVM4005V48FH-M17-HD Frame Size (mm) 40 Rated Voltage (V) 24 Working Voltage(V) 24-48 Rated Power (W) 50 Rated Torque (N.m) 0.16 Peak Torque (N.m) 0.48 Rated Speed (rpm) 3000…
-
50W AC Servo motor ELVM4010V48FH-M17-HD (No Brake)
Voltage 48V, rated power 100W Frame 40mm, rated torque 0.32Nﾷm, rated speed 3000r/min No brake Insulation class: Class F 17 bit magnetic multi-turn absolute encoder IP65 Model ELVM4010V48FH-M17-HD Frame Size (mm) 40 Rated Voltage (Vac) 48 Rated Power (W) 100 Rated Torque (N.m) 0.32 Peak Torque (N.m) 0.96 Rated Speed (rpm) 3000 Peak Speed (rpm)…
-
750W AC servo motor driver – EL7-EC750N – EtherCAT
EL7 230V Series AC servo products are a high performance AC digital servo which is designed for high accuracy position/velocity/torque control. With a power rating ranging from 400W up to 2kW which provides a perfect solution for different applications with easy tuning process. EL7 series AC servo drives are using the latest Digital Signal Processing…
-
750W integrated servo motor, with brake – iSV2-RS8075V48G
● Main power voltage: 24-60VDC. Rated voltage: 48VDC ● Rated power: 750W. Rated torque: 2.39N.m. Overload: 300% ● 17 bit incremental magnetic encoder ● Pulse+Direction ● Modbus RTU over RS485. Build-In 16 PR paths ● Dip switch for node ID, baud rate and terminating resistor settings ● RS-232 serial interface for easy tuning with Motion Studio ● With brake